The blade of the knife and the handles are one-piece: stainless steel damask top "Khorosan cranked". Carbon content of 1.9%, microhardness of 72-74 HRC units, hardness of the matrix holding carbides, 60-62 HRC units. The ingot germination with carbides is complete, uniform, with the formation of carbide branches (grids) with a thickness of 50-500 microns. The bulk density of stainless steel is 8,17 g/ cubic cm.
The base of the knife handle is solid with a blade. Guldbrandt is made of cobalt-chromium-nickel steel, inert to any environmental influences. Both halves of the guldbandt are assembled on internal steel pins passing through the bulat array. The structure is soldered with PSR solid solder. The handle tree is a maple cap with through impregnation under jasper and stabilization with Danish oil. Fastening of the handle halves through the bulat array at three points with stainless screw nuts diam. 4 mm, hidden decorative rivets.
| Total length |
335 мм. |
| Blade Length |
255 мм. |
| Blade width |
30-40 мм. |
| Handle length |
130 мм. |
| Handle thickness |
17,5-29,5 мм. |
| Butt thickness |
3,40 мм. |
|
-
-
